RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
Axle Shaft: Service and Repair
Rear Axle - 267RBI
REMOVAL
1. Remove the axle shaft flange bolts.
2. Slide the axle shaft out from the axle tube.
INSTALLATION
1. Clean the gasket contact surface area on the flange with an appropriate solvent. Install a new flange gasket and slide the axle shaft into the tube.
2. Install the bolts and tighten to 129 Nm (95 ft. lbs.).
