RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
6. On light duty transmissions, remove the extension housing bushing with Remover 6957.
7. On heavy duty transmissions, remove the extension housing bushing with Remover 8155.
INSTALLATION
1. On light duty transmissions, install housing bushing with Installer 6951 and Handle C-4171 (Fig. 130).
2. On heavy duty transmissions, install housing bushing with Installer 8156 and Handle C-4171.2
3. On light duty transmissions, install housing seal with Installer C-3972-A and Handle C-4171 (Fig. 131).
4. On heavy duty transmissions, install housing seal with Installer 8154 and Handle C-4171.2
5. Install propeller shaft with reference marks aligned.
6. Check and fill transmission.
7. Remove support and lower vehicle.