RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
Radio/Stereo Noise Filter: Service and Repair
Bed-to-Cab Ground Strap Replacement
Cab-to-Bed Ground Strap Replacement
REMOVAL
1. Raise and support the vehicle.
Fig. 13 Cab-To-Bed Ground Strap Remove/Install
2. Remove the screw that secures the cab-to-bed ground strap eyelet to the front crossmember of the cargo bed.
3. Remove the screw that secures the cab-to-bed ground strap eyelet to the cab floor panel.
4. Remove the cab-to-bed ground strap from the vehicle.
INSTALLATION
1. Position the cab-to-bed ground strap to the cab floor panel.
2. Install and tighten the screw that secures the cab-to-bed ground strap eyelet to the cab floor panel. Tighten the screw to 3.9 Nm (35 in. lbs.).
3. Position the cab-to-bed ground strap to the front crossmember of the cargo bed.
4. Install and tighten the screw that secures the cab-to-bed ground strap eyelet to the front crossmember of the cargo bed. Tighten the screw to 3.9
Nm (35 in lbs).
5. Lower the vehicle
