RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
Front Door Panel: Service and Repair
Waterdam
WATERDAM
REMOVAL
CAUTION: Do not allow the waterdam or adhesive to become contaminated with dirt or other foreign substances.
Do not damage the waterdam during removal and installation.
If the waterdam becomes contaminated or damaged, replace the waterdam.
1. Remove the inside handle actuator.
2. Remove the speaker.
3. Separate the waterdam from the inner door panel and off of the latch linkages.
INSTALLATION
CAUTION: Do not allow the waterdam or adhesive to become contaminated with dirt or other foreign substances.
Do not damage the waterdam during removal and installation.
If the waterdam becomes contaminated or damaged, replace the waterdam.
1. Position the wire harness and actuator rods through the holes in the waterdam.
2. Secure the waterdam to the inner door panel.
3. Install the speaker.
4. Install the inside handle actuator.