dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Interior Moulding / Trim|Carpet > < Procedures|Page 6201
Page 2
background image

STEERING WHEEL, STEERING COLUMN, SEAT BELT TENSIONER, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE.
DISCONNECT AND ISOLATE THE BATTERY NEGATIVE (GROUND) CABLE, THEN WAIT TWO MINUTES FOR THE AIRBAG SYSTEM
CAPACITOR TO DISCHARGE BEFORE PERFORMING FURTHER DIAGNOSIS OR SERVICE. THIS IS THE ONLY SURE WAY TO DISABLE
THE AIRBAG SYSTEM. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT
AND POSSIBLE PERSONAL INJURY.

1. Seat the bottom of the receiver into position.
2. Pivot the receiver forward and seat the retaining clips fully.

Interior Moulding / Trim|Carpet > < Procedures|Page 6201