RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
Glove Box Opening Upper Trim Strip Remove/Install
3. Remove the three screws that secure the trim to the instrument panel glove box opening upper reinforcement.
4. Remove the trim from the instrument panel glove box opening upper reinforcement.
INSTALLATION
1. Position the trim onto the instrument panel glove box opening upper reinforcement.
2. Install and tighten the three screws that secure the trim to the instrument panel glove box opening upper reinforcement. Tighten the mounting
screws to 2.2 N.m (20 in. lbs.).
3. Close the glove box.
4. Reconnect the battery negative cable.
