RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
Headliner: Service and Repair
HEADLINER
REMOVAL
1. Remove the a-pillar trim. Refer to Trim Panel.
2. Remove the upper b-pillar trim. Refer to Trim Panel.
3. Remove the upper c-pillar trim, if equipped. Refer to Trim Panel.
4. Remove the coat hooks.
5. Disconnect the headliner harness electrical connector at the left a-pillar.
6. Remove the dome lamp.
7. Remove the overhead console.
8. Remove the sun visors.
9. Remove the sun visor supports.
10. Lower the headliner and disconnect the center high mounted stop light.
11. Lower the front of the headliner down to the floor just in front of the instrument panel and remove through the passenger door.
INSTALLATION
1. Install the headliner into the vehicle through the passenger door.
2. Raise the headliner and insert the right side above right side pillar trim pieces.
3. Connect the center high mounted stop light electrical connector.
4. Install the sun visor supports.
5. Install the coat hooks.
6. Install the sun visors.
7. Install the overhead console.
8. Install the dome lamp.
9. Connect the headliner harness electrical connector at the left a-pillar.
10. Install the upper c-pillar trim, if equipped.
11. Install the upper b-pillar trim.
12. Install the upper a-pillar trim.
