RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
5
Separate A-pillar trim from vehicle.
INSTALLATION
1
Position A-pillar trim in vehicle.
2
Engage speaker harness connector, if equipped.
3
Align spring clips and press into place.
4
Install A-pillar grab handle, if equipped.
A-PILLAR GRAB HANDLE
REMOVAL
1
Using a small flat blade screw driver, pry trim plugs from A-pillar grab handle.
2
Remove screws attaching grab handle to A-pillar.
3
Separate A-pillar grab handle from vehicle.
INSTALLATION
1
Position grab handle on A-pillar.
2
Install screws attaching grab handle to A-pillar.
3
Install trim plugs in A-pillar grab handle.
A-Pillar Trim and Grab Handle
A-PILLAR TRIM/GRAB HANDLE
REMOVAL