RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
Power Seat Switch: Testing and Inspection
Driver Power Seat
Driver Power Seat Switch Test
The following procedure can be used to test the power seat switch on standard and quad cab models. Some quad cab trucks utilize a additional power
lumbar option, if the switch being tested does not have the lumbar option simply ignore the lumbar portion of the test.
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat.
Fig. 1 Driver Seat Switch
Fig. 2 Testing Driver Power Seat Switch (Part 2 Of 2)
3. Use an ohmmeter to test the continuity of the power seat switches in each position. See the Power Seat Switch Continuity chart.
If OK, see Power Seat Adjuster and Motors or Power Lumbar Adjuster and Motor in the Diagnosis and Testing See: Power Seat Motor.
If not OK, replace the faulty power seat switch unit.
