RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
Fig. 9 Element Connector
4. Disconnect the 2-way heated seat element connector which requires testing or Check for continuity between the two heated seat element circuit
cavities. There should be continuity.
If OK, the elements within the seat assembly test OK, go to Step 5.
If not OK, replace the faulty seat heating element.
5. Test the seat wire harness between the heated seat module connector and the appropriate 2-way heated seat wire harness connector for shorted or
open circuits.
If OK, element are OK, proceed with testing the heated seat sensor and module.
If not OK, repair the shorted or open seat wire harness as required.
