RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
5. Install the disc brake caliper.
INSTALLATION
REAR - SRT-10
NOTE: Install a new copper washers on the banjo bolt when installing
1. Install the rear disc brake caliper.
1. Ant-rattle clips
2. Disc Brake Caliper Adapter
3. Caliper slide Pin bolts
4. Caliper Adapter Bolts
5. Brake Hose
6. Banjo Bolt
2. Install the banjo bolt (6) with new copper washers to the caliper. tighten to 27 Nm (20 ft. lbs.).
3. Install the caliper pin bolts (3). tighten to 30 Nm (22 ft. lbs.).
4. Bleed the base brake system.
5. Install the tire and wheel assembly. See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement
6. Lower the vehicle.