RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
Hydraulic Brake Booster: Service and Repair
HYDRAULIC BOOSTER
REMOVAL
NOTE: If the booster is being replaced because the power steering fluid is contaminated, flush the power steering system before replacing the
booster.
1. With engine off depress the brake pedal 5 times to discharge the accumulator.
2. Remove brake lines from master cylinder.
3. Remove mounting nuts from the master cylinder.
4. Remove the bracket from the hydraulic booster lines and master cylinder mounting studs.
5. Remove the master cylinder.
6. Remove the return hose and the two pressure lines from the hydraulic booster.
7. Remove the booster push rod clip, washer and rod remove from the brake pedal.