RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
Fig. 7 Defroster And Demister Duct Adapter Remove/Install
2. Using a trim stick or another suitable wide flat-bladed tool, gently pry at the perimeter edges of the defroster and demister duct adapter to release
the snap features from the top of the HVAC housing.
3. Remove the defroster and demister duct adapter from the top of the HVAC housing.
INSTALLATION
Defroster And Demister Ducts
1. Place the defroster and demister duct unit in position.
2. Engage the demister tubes with each end of the main demister duct.
3. Install the screws that secure the defroster and demister ducts to the instrument panel brackets. Tighten the mounting screws to 2.2 Nm (20 in.
lbs.).
4. Install the instrument panel top cover on the instrument panel. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel,
Service and Repair, Instrument Panel Service Procedures, Instrument Panel Top Cover Replacement, See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Top Cover
Defroster And Demister Duct Adapter
1. Snap the defroster and demister duct adapter from the top of the HVAC housing.
2. Roll the instrument panel assembly up, and fasten it properly to the vehicle. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument
Panel, Service and Repair, Instrument Panel Service Procedures, Instrument Panel Assembly Replacement, See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Assembly
