RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
blower wheel hub.
Fig. 5 Blower Motor Seal
3. Be certain that the blower motor seal is installed on the blower motor housing.
4. Install the blower motor and wheel assembly, and cover in the HVAC housing with three mounting screws. Tighten the mounting screws to 2.2
Nm (20 in. lbs.).
5. Plug the blower motor wire harness connector into the HVAC housing wire harness.
6. Install the blower motor wire harness into the wire harness retainer.
7. Connect the blower motor cooling tube to the nipple on the blower motor housing.
8. Connect the battery negative cable.
