RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
Turn Signal Bulb: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove park and turn signal lamp.
3. Rotate bulb socket 1/4 turn counterclockwise and pull turn signal lamp socket from back of lamp.
4. Pull park and turn signal lamp bulb from socket.
INSTALLATION
1. Install park and turn signal lamp bulb in socket.
2. Install park and turn signal lamp socket into back of lamp.
3. Install park/turn signal lamp.
4. Connect the battery negative cable.
