RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
Mini ISO Relay: Description and Operation
Fig. 17 Type 1 Relay
RELAY
A relay is an electromechanical device that switches fused battery current to a electrical component when the ignition switch is turned to the Accessory
or Run positions, or when controlled by a electronic module. The relays are located in the junction block or power distribution center (Fig. 17).
The relay is a International Standards Organization (ISO) relay. Relays conforming to the ISO specifications have common physical dimensions, current
capacities, terminal patterns, and terminal functions.
A relay cannot be repaired or adjusted and, if faulty or damaged, it must be replaced.
The ISO relay consists of an electromagnetic coil, a resistor and three (two fixed and one movable) electrical contacts. The movable (common feed)
relay contact is held against one of the fixed contacts (normally closed) by spring pressure. When the electromagnetic coil is energized, it draws the
movable contact away from the normally closed fixed contact, and holds it against the other (normally open) fixed contact.
When the electromagnetic coil is de-energized, spring pressure returns the movable contact to the normally closed position. The resistor is connected in
parallel with the electromagnetic coil in the relay and helps to dissipate voltage spikes that are produced when the coil is de-energized.
