RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
Canister Purge Solenoid: Service and Repair
EVAP/PURGE SOLENOID
Fig.2 Duty Cycle EVAP Canister Purge Solenoid Location
REMOVAL
The duty cycle solenoid is attached to a bracket mounted to the right inner fender.
1. Disconnect electrical wiring connector at solenoid.
2. Disconnect vacuum harness at solenoid.
3. Remove solenoid from support bracket.
INSTALLATION
1. Install solenoid assembly to support bracket.
2. Connect vacuum harness.
3. Connect wiring connector.
