RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
4. From inside vehicle, hold up accelerator pedal. Install throttle cable core wire and plastic cable retainer into and through upper end of pedal arm
(the plastic retainer is snapped into pedal arm). When installing plastic retainer to accelerator pedal arm, note index tab on pedal arm (Fig. 39).
Align index slot on plastic cable retainer to this index tab.
5. Connect negative battery cables to both batteries.
6. Before starting engine, operate accelerator pedal to check for any binding.
7. Install cable/lever cover.
