dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

PCM - Hard Starting/Idle Speed Fluctuations|Page 3230 > < Engine Controls - Extended Idling In Cold Weather|Page 3225
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
PCM - Hard Starting/Idle Speed Fluctuations

NUMBER: 18-014-01

GROUP: Vehicle Performance

DATE: July 9, 2001

SUBJECT:
Performance Enhancement For Severe Cold Weather Environments

OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software (59t7a)

NOTE

THIS BULLETIN APPLIES TO ALL RAM TRUCKS EQUIPPED WITH A 5.9L 24-VALVE CUMMINS DIESEL ENGINE WITH A 49-STATE
EMISSIONS CALIBRATION AND AN AUTOMATIC TRANSMISSION.

MODELS:

1998-2002

(BR/BE)

Ram Truck

SYMPTOM/CONDITION:

Customer may experience hard starting and/or idle speed fluctuations.

Cummins 24-valve engines used with automatic transmissions can be severely effected by the use of sub-grade # 1 diesel fuel when ambient temperatures
are below 0°C (32°F), typically prevalent during the Winter months in Alaska, Northwestern Canada, and similar climates/temperatures elsewhere.

NOTE

THIS CHANGE WILL HAVE NO EFFECT ON PERFORMANCE DURING WARM WEATHER OR WHEN STANDARD GRADE DIESEL
FUELS # 1 OR # 2 ARE USED.

NOTE

VEHICLES WITH 49-STATE CERTIFICATION CAN APPLY THIS CALIBRATION CHANGE IF NEEDED. THE CALIBRATION CAN BE
CHANGED BACK TO THE ORIGINAL CALIBRATION IF DESIRED.

DIAGNOSIS PROCEDURES:

1.

Using the Diagnostic Scan Tool (DRBIII(R)) with the appropriate Diagnostic Procedures, verify all engine/transmission systems are functioning as
designed. If other DTC's are present, record them on the repair order and repair as necessary before proceeding further with this bulletin.

2.

If the condition above has been verified, perform the repair procedure.

PARTS REQUIRED:

EQUIPMENT REQUIRED:

NOTE

PCM - Hard Starting/Idle Speed Fluctuations|Page 3230 > < Engine Controls - Extended Idling In Cold Weather|Page 3225