RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
WORM SHAFT
REMOVAL
1. Remove housing end plug.
2. Remove rack piston plug.
3. Remove side cover and pitman shaft.
4. Turn stub shaft COUNTERCLOCKWISE until the rack piston begins to come out of the housing.
5. Insert Arbor C-4175 into bore of rack piston and hold tool tightly against worm shaft.
6. Turn the stub shaft with a 12 point socket COUNTERCLOCKWISE, this will force the rack piston onto the tool and hold the rack piston balls in
place.
7. Remove the rack piston and tool together from housing.
8. Remove tool from rack piston.
9. Remove rack piston balls.
