RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
Clutch Disc: Service and Repair
CLUTCH DISC
REMOVAL
1. Raise and support vehicle.
2. Support engine with wood block and adjustable jack stand, so engine mounts are not strained (Fig. 4).
3. Remove transmission and transfer case, if equipped.
4. If pressure plate will be reused, mark position of cover on flywheel with paint or scriber (Fig. 5).
5. Insert clutch alignment tool through clutch disc and into pilot bushing, to hold disc in place.
