RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
16. Remove rear pinion bearing with Puller/Press C-293-PA and Adapters C-293-37 (Fig. 55).
17. Remove pinion depth shims from the pinion shaft and record thickness of the depth shims.
INSTALLATION
1. Apply Mopar Door Ease stick or equivalent lubricant to outside surface of bearing cups.
2. Install rear pinion bearing cup with Installer D-lll and Handle C-4171 (Fig. 56) and verify cup is seated.
