RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
Drive/Propeller Shaft: Service and Repair
Propeller Shaft - Rear
Removal and Installation
PROPELLER SHAFT REAR
REMOVAL
1. Shift transmission into Neutral.
2. Raise and support vehicle on safety stands.
3. Mark a line across the axle pinion yoke or companion flange and propeller shaft or flange yoke for installation reference.
4. Mark the outline of the center bearing on the frame crossmember for installation reference, if equipped.
5. Remove bolts that attach the center bearing to the support bracket (Fig. 10), if equipped.