RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
Seals and Gaskets: Service and Repair
Front Axle - 248FBI
AXLE SHAFT SEALS
REMOVAL
1. Remove hub bearings and axle shafts.
2. Remove axle shaft seal from the differential housing with a long drift or punch. Be careful not to damage housing.
3. Clean the inside perimeter of the differential housing with fine crocus cloth.
INSTALLATION
1. Apply a light film of oil to the inside lip of the new axle shaft seal.
2. Install the inner axle seal (Fig. 25).
3. Install axles and hub bearings.