RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
4. Remove extension housing seal (Fig. 129) using Remover C-3985-B.
5. On heavy duty 4X2 vehicles, remove extension housing seal with a pry tool or a slide hammer mounted screw.
6. On light duty transmissions, remove the extension housing bushing with Remover 6957.
7. On heavy duty transmissions, remove the extension housing bushing with Remover 8155.
INSTALLATION
1. Install housing bushing with Handle C-4171 (Fig. 130) and Installer.
Light Duty - Installer 6951
Heavy Duty - Installer 8161
2. Install housing seal with Handle C-4171 (Fig. 131) and Installer.
Light Duty - Installer C-3972-A
Heavy Duty - Installer 8154
3. Install propeller shaft with reference marks aligned.
4. Check and fill transmission.
5. Remove support and lower vehicle.