RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
Shift Boot: Service and Repair
NV5600 - Manual Transmission
SHIFT COVER NV5600
REMOVAL
1. Shift transmission into Neutral.
2. Unscrew and remove the shift lever extension from the shift
3. Remove screws attaching shift boot to floorpan. Then slide boot upward on the shift lever.
4. Remove the bolts holding the shift tower to the isolator plate and transmission gear case.
5. Remove the shift tower (Fig. 102) and isolator plate (Fig. 103) from the transmission.
INSTALLATION
1. Shift transmission into third gear.
2. Clean the mating surfaces of shift tower, isolator plate and transmission gear case with suitable wax and grease remover.