RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Rear Vision Camera: Service and Repair
Rear Camera - Removal
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Open the tailgate.
3. Remove the tailgate cover See: Body and Frame/Tailgate/Tailgate Interior Trim Panel/Service and Repair/Tailgate Cover - Removal.
4. Disconnect the rear camera electrical harness.
5. Remove the tailgate release handle See: Body and Frame/Tailgate/Tailgate Release Handle/Service and Repair/Latch Release Handle - Removal.
6. Remove the rear camera from the tailgate handle.
