RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Memory Positioning Module: Service and Repair
Memory Seat Module - Installation
INSTALLATION
CAUTION: The Memory Seat Module (MSM) mounting tabs can be damaged during module installation. Use care to properly align tabs to
prevent binding that could result in tab breakage.
1. Place the module (1) into position making sure the mounting tabs are properly aligned with the front bracket.
2. Push down on the front of the module (1) snapping the tabs into place in the side brackets.
3. Connect the electrical connectors to the MSM. Four in the front and one in the back.
4. Connect the battery negative cable.
5. Using an appropriate scan tool go to the MSM miscellaneous functions and perform the standardization routine.
6. Verify system and vehicle operation.
