RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Trailer Connector: Service and Repair
Trailer Tow Connector - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Reach behind the center of the rear bumper (2) to access and disconnect the connector (1) of the body wire harness from the combined 4-way and
7-way trailer tow connector (3).
3. Reach behind the center of the rear bumper to compress each of the two spring clips (1) on the trailer tow connector housing (3) far enough to
push the housing out through the face of the bumper.
4. Remove the trailer tow connector from the face of the rear bumper.
