RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Headliner: Service and Repair
Headliner - Installation
INSTALLATION
Standard Cab
CAUTION: Hands should be clean or clean cloth gloves used when handling the headliner to avoid damage to the headliner.
NOTE: Quad cab shown, standard cab is similar.
1. Position the coat hooks (5) onto the headliner and install the screws into the mounting clips.
2. Close the screw caps fully.
3. Position the visor supports (3) onto the headliner and install the screws into the mounting clips.
4. Install the overhead console (2) to the headliner. See: Console/Service and Repair/Overhead Console - Installation
5. Position the visors onto the headliner and install the screws (4) into the mounting clips.
6. Install the headliner through the front passenger door.
7. Lift the headliner into position and engage the visor center supports.
Position the wire harness on the A-pillar and seat the support clips (3) fully.
