RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
1. Remove the lower C-pillar trim (3). See: Pillar Trim/C-Pillar Trim Panel - Removal
2. Separate the turning loop cover (2) and remove the turning loop bolt.
3. Pull the upper trim (1) off and release the retaining clips.
Mega Cab
1. Remove the lower C-pillar trim. See: Pillar Trim/C-Pillar Trim Panel - Removal
2. Separate the turning loop cover and remove the turning loop bolt. See: Restraint Systems/Seat Belt Systems/Seat Belt Height Adjuster/Service and
Repair/Seat Belt Turning Loop Adjuster - Removal
3. Pull the upper trim off and release the retaining clips.
Lower