RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Door Module: Description and Operation
Door Module - Description
DESCRIPTION
There are two Door Modules, Driver Door Module (DDM), and Passenger Door Module (PDM) One is located in the driver door and one in the
passenger door, just behind the door trim panel. The door modules also act as an interface in each door for electrical functions (door lock switches and
door ajar switches).
The modules send a bus message to the power mirrors to adjust them to a preset position when a memory recall request has been made.
The Memory System makes available for immediate recall personalized preferences of the following:
-
Automatic temperature control settings.
-
Outside mirror positions.
-
Power adjustable brake and accelerator pedal position.
-
Power seat horizontal, vertical, recliner, and easy entry positions.
-
Radio push button station selections.
The major components of the Memory System are:
-
Memory Selector Switch - located on the driver seat panel.
-
Driver Door Module (DDM) - located in the driver door, behind the trim panel.
-
Passenger Door Module (PDM) - located in the passenger door, behind the trim panel.
-
Wireless Ignition Node (WIN) - located at ignition key cylinder.
-
FOBIK - Integrated Key.
-
Memory Seat Module (MSM) - located underneath the driver seat and also controls the Adjustable Pedals.
-
Radio - located in the instrument panel center stack.
-
Automatic Temperature Control (ATC) - located in the instrument panel center stack.
The memory recall is available at the press of a button on the drivers seat panel or, by using the FOBIK transmitter if it is programmed to trigger the
recall.
Radio settings include up to 20 push button presets (10 AM and 10 FM), and the last station selection, even if it is not one of the 20 preset selections.
