RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
8. Position the vented seat bag (1) through the seat back support spring (3).
9. Position the vented seat bag (1) onto the vent motor (2) and seat the clips fully.
10. Seat the foam and cover assembly over the seat back frame fully and secure the J-straps (1 and 2).
11. Install the new head restraint sleeves with slave sleeve (4) in the right position and master sleeve (3) in the left position.
12. Press the lock buttons (2) on the sleeves and insert the head restraint tubes (1) into the head restraint guide sleeves, ensuring proper forward facing
orientation of the head restraint.