RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
15. Separate the cover J-straps (1) from the sides and remove the foam/cover assembly.
16. Remove the 10 hog rings (2) and separate the cover (1) from the foam.
17. Pull the vent pad (1) through the foam.
Mega Cab Rear
REMOVAL
1. Fold both rear seats flat.
2. Remove the filler panels from the rear seat to storage compartment.
3. Separate the J-straps at the bottom of the seat back.
4. Remove both hinge covers from the back section being worked on.
5. Remove the lower anchor for the center seat belt.