RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
1. Install the seat cushion frame and install the seat cushion frame bolts. See: Description and Operation
2. Tighten the seat cushion frame bolts to 55 Nm (41 ft. lbs.)
3. Position the cover (3) on to the foam (1) and install three new hog rings (2).
4. Position the foam and cover assembly over the seat cushion frame.
5. Install the seat cushion foam/cover (1) over the seat cushion frame and secure the J-straps (2).
6. Connect the seat cushion heat mat electrical connector, if equipped.
