RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Seat Heater Control Module: Description and Operation
Heated Seat Module - Operation
OPERATION
The Heated Seat Module (HSM) is used to control the functions of the following systems:
-
Vented Seats- Two vented seats can be controlled by the HSM, See: Description and Operation/Heated/Cooled Accessories - Vented Seats -
Operation.
-
Heated Seats- Up to four heated seats can be controlled by the HSM,See: Seat Heater/Description and Operation/Heated Seats - Operation.
-
Heated Steering Wheel- See: Steering and Suspension/Steering/Steering Wheel/Description and Operation/Heated Steering Wheel - Operation.
NOTE: The HSM will configure itself depending on what components are installed on the vehicle. This allows for one module to be used for
every component combinations available.
The HSM.will only be on with the engine running. Therefore the heated seats, vented seats, and heated steering wheel will only operate with the engine
running. Seat heating and seat venting are independent systems; however, they can not be actuated at the same time. Turning the vented seats on when
the heated seat are already on will turn off the heated seats and vice versa. The heated steering wheel on the other hand can be on at the same time as
either the heated seats or the cooled seats.
