RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
PASSENGER POWER SEAT SWITCH CONTINUITY
DRIVER WITH MEMORY SEAT SYSTEM
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat See: Service and Repair/Power Seat Switch - Removal.
3. Use an ohmmeter to test the resistance of the power seat switch. Refer to DRIVER POWER SEAT SWITCH WITH MEMORY SEAT
SYSTEM CONTINUITY table. If not OK, replace the faulty power seat switch. If switch tests OK See: Seats/Testing and
Inspection/Component Tests and General Diagnostics/Memory Seat System.
DRIVER POWER SEAT SWITCH WITH MEMORY SEAT SYSTEM CONTINUITY