RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
1. Position the door seal (6) to the door.
2. Install the door seal being sure to engage the retainers into the seal.
3. Secure the seal around the perimeter of the door.
4. If required, install the rear trim to the rear door.
5. Shut the door and verify proper seal.
Windshield A-Pillar Weatherstrip - Removal
REMOVAL
1. Starting at the rear of the windshield weatherstrip (1) carefully peel the seal away from the sheet metal working towards the front of the vehicle.
2. Remove the weatherstrip from the retainers along the side of the windshield.
3. Clean any access adhesive from the sheet metal.