RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Hydraulic Control unit (HCU) - Installation
INSTALLATION
1. Install HCU/ABM (3) on the mounts to the battery tray (4) and tighten to 15 Nm (11 ft. lbs.).
2. Install the brake lines to the HCU (3) and tighten to 19 Nm (170 in. lbs.).
3. Install the electrical harness connectors to the HCU/ABM (3) and push down on the release to secure the connectors.
4. Install the battery.
5. Install the battery cables to the battery.
6. Bleed ABS brake system See: Brake Bleeding/Service and Repair.