RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Traction Control Switch: Service and Repair
Electronic Stability Program (ESP) Switch - Removal
REMOVAL
NOTE: The Electronic Stability Control (ESC) may also be referred to as Electronic Stability Program (ESP) depending on the vehicle model
year and configuration. Certain components may also reference ESP, ESC, or use the traction control symbol.
1. Remove the instrument panel center bezel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Bezel - Removal.
2. Disconnect the Electronic Stability Control (ESC) electrical connector from the radio trim panel.
3. Remove the ESC switch (2) from the switch bank.