RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
2. Install the hub and rotor assembly.
3. Install the rear axle shaft to the housing with dual wheels, refer to Differential and Driveline/Rear Axle Installation.
4. Install the caliper adapter bolts 328 Nm (242 ft.lbs).
5. Install the disc brake caliper, See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper - Installation.
6. Install the tire and wheel assembly See: Maintenance/Wheels and Tires/Specifications.
7. Remove the supports and lower the vehicle.
