RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Brake Caliper: Removal and Replacement
Disc Brake Caliper Adapter Mounting Bracket - Removal
REMOVAL
NOTE: Leaf spring system shown, coil spring system similar.
1. Remove wheel and tire assembly.
2. Remove the disc brake caliper See: Disc Brake Caliper - Removal.
3. Remove the caliper adapter See: Disc Brake Caliper Adapter - Removal.
4. Remove the rotor See: Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Brake Rotor - Removal.
5. Remove the axle shaft, refer to Differential and Driveline/Rear Axle Removal.
6. Remove the park brake shoes See: Parking Brake System/Parking Brake Shoe/Service and Repair/Removal and Replacement/Removal.
7. Remove the parking brake cable from the brake lever.
8. Remove the nuts (3) attaching the support plate to the axle and remove the support plate.
9. Remove the caliper adapter mount (1) from the axle housing (2).
Disc Brake Caliper Adapter Mounting Bracket - Installation
INSTALLATION
NOTE: Leaf spring system shown, coil spring system similar.