RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
CAUTION: Do not scratch piston bore while removing the seals.
9. Remove piston seals (3) from caliper (1).
10. Push caliper mounting bolt bushings (3) out of the boot seals (2) and remove the boot seals from the caliper (1).
11. Remove caliper bleed screw.
Light Duty
LIGHT DUTY
CAUTION: Dirt, oil, and solvents can damage caliper seals. Insure assembly area is clean and dry.
1. Lubricate caliper pistons, piston seals and piston bores with clean, fresh brake fluid.
