RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
6. Seat dust boot in caliper (2) with Handle C-4171 (1) and Installer (3):
-
54 mm caliper: Installer C-3716-A
7. Install the second piston and dust boot.
8. Lubricate caliper mounting bolt bushings, boot seals and bores with Mopar brake grease or Dow Corning(R) 807 grease only. CAUTION: Use of
alternative grease may cause damage to the boots seals.
9. Install the boot seals into the caliper seal bores and center the seals in the bores.
10. Install mounting bolt bushings into the boot seals and insure seal lip is engaged into the bushing grooves at either end of the bushing.
11. Install caliper bleed screw.