RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Cruise Control Switch: Service and Repair
Speed Control Switch - Removal
REMOVAL
The speed control switch is mounted in the steering wheel and wired through the clock spring device under the airbag module.
WARNING: If removal of airbag module is necessary, refer to the restraint systems.
1. Remove the air cleaner lid, disconnect the inlet air temperature sensor and makeup air hose.
2. Remove the negative battery cable.
3. Turn off ignition.
4. Remove air bag, refer to the Restraint systems.
5. Remove the top mounting screw.