RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Coolant Reservoir: Service and Repair
Coolant Recovery Bottle - Installation
6.7L DIESEL
1. Position the coolant recovery bottle (3) into the vehicle.
2. Install mounting bolts (1). Tighten to 8.5 Nm (75 in. lbs).
3. Install overflow hose (2) onto the coolant recovery bottle (3).
4. Fill the coolant recovery bottle (3) with coolant until the required level is met.
5. If equipped, connect the negative battery cable to the auxiliary battery.
6. Connect the negative battery cable.
