RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
7. Remove the fan shroud-to-radiator shroud mounting bolt (2) located on the passenger side of the vehicle.
8. Remove the fan shroud-to-lower radiator shroud push pins.
CAUTION: Do not remove the fan pulley bolts. This pulley is under spring tension.
9. The electronically controlled viscous fan drive/fan blade assembly is attached (threaded) to the fan pulley shaft. Remove the fan blade/fan drive
assembly from fan pulley by turning the mounting nut counterclockwise (as viewed from front). Threads on the viscous fan drive are
RIGHT-HAND. A 36 MM Fan Wrench can be used. Place a bar or screwdriver between the fan pulley bolts to prevent pulley from rotating.
10. Disengage the fan shroud lower retaining clips.
11. Collapse fan shroud toward front of vehicle and remove fan drive/fan blade and fan shroud as an assembly.
12. Remove the electrical connector bracket (2) by disengaging the retainer clip and sliding the connector bracket (2) out of the fan shroud (1).
CAUTION: The electronically controlled viscous fan drive is vibration and impact sensitive, especially at the electrical connectors. Do not drop
the unit.
