RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Measure the pin bore (2). The maximum diameter is 40.012 mm (1.5753 inch), Minimum is 40.006 mm (1.575 inch). If the bore is over limits, replace
the piston (1).
Inspect the piston pin for nicks, gouges and excessive wear. Measure the pin diameter (1). The minimum diameter is 39.997 mm (1.5747 inch),
maximum 40.003 mm (1.5749 inch). If the diameter is out of limits, replace the pin (1).
Connecting Rod
CONNECTING ROD
Inspect the connecting rod for damage and wear. The I-Beam section of the connecting rod cannot have dents or other damage. Damage to this part can
cause stress risers which will progress to breakage.
Measure the connecting rod pin bore (1). The maximum diameter is 40.042 mm (1.5765 inch), minimum diameter is 40.019 mm (1.5756 inch). If out of
