RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
6. Remove the retainers (5), springs (4), valve seals (3) (if necessary), and valves (2). Arrange or number all components so they can be installed in
their original locations.
7. Repeat the procedure on all cylinders to be serviced.
CLEANING
Clean the valve stems with crocus cloth or a Scotch-Brite(TM) pad. Remove carbon with a soft wire brush. Clean valves, springs, retainers, and valve
retaining locks in a suitable solvent. Rinse in hot water and blow dry with compressed air.
INSPECTION
Visually inspect the valves for abnormal wear on the heads, stems, and tips. Replace any valve that is worn out or bent.
