RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Engine Mount: Service and Repair
Engine Mount Insulator - Installation
G56 Manual Transmission
G 56 MANUAL
1. Install the rear transmission mount (2). Tighten bolts (1) to 50 Nm (37 ft. lbs.).
2. Lower the transmission.
3. Install nuts securing transmission mount to crossmember. Tighten nuts to 47 Nm (35 ft. lbs.).
4. Remove transmission jack.
5. Lower the vehicle.
68RFE Automatic Transmission
68 RFE AUTOMATIC
NOTE: 4x4 Models
1. Install the rear transmission mount (2). Tighten bolts (1) to 50 Nm (37 ft. lbs.).
2. Lower the transmission.
3. Install nuts securing transmission mount to crossmember. Tighten nuts to 47 Nm (35 ft. lbs.).
4. Remove transmission jack.
5. Lower the vehicle.
